Another cruise
So I got everything back together and we were able to do two laps in the neighborhood today. It went much smoother with the flywheel vibrations taken out. The rear suspension stiffening helped out but there is still some clunking and binding when first starting out. The car is back on the ground so I’ll squirm under there and measure my angles again later this week.
A good idea would have been to measure them before we pulled the engine, as well and the ride height. Troubleshooting will consist of adjusting the angle of the motor itself via the motor and transmission mounts and then adjusting the ride height by increasing or decreasing pressure in the rearairbags.
I’m sure a full suspension refurbishing and some subframe connectors would help too, but that will have to come later. As my wonderful wife says, this is the project that never ends. So I have to keep coming up with more stuff to do, right?